Shake the inhaler and remove the cap. Carefully read the instructions to the inhaler and check whether it is necessary to fill it with a medicine before use. If necessary, do so and follow the instructions.
Insert the inhaler tip into the separator.
Remove the cap from the separator.
Hold the inhaler vertically behind the bottom.
Tilt the head slightly back and make a slow and maximum (as much as possible) exhalation.
Insert the tip of the separator in the mouth.
Click on the inhaler to take the medicine into the separator, then slowly inhale (first press, then inhale).
Wait 10 seconds to give the medicine the most spread out over the lungs.
If you need to repeat the procedure, wait 30-60 seconds.
Search this site: